The sE Electronics DM1 Dynamite is an active in-line preamp that boosts the signal of your passive ribbon and dynamic mics by a robust 28dB. Inserted between a passive ribbon or dynamic microphone and a mic preamplifier, the DM1 will also reduce the possibility of interference, while providing a healthy level to your preamp — without any added noise or coloration. Get optimum performance from the mics you love with the sE Electronics DM1 Dynamite!
High-performance Class A design
With its state-of-the-art Class A circuit and hand-selected high-grade FETs, the DM1 boasts the lowest self-noise in its class. What’s more, thanks to its dedicated output buffer amplifier, the gain boost it delivers is always a consistent 28dB regardless of the connected load. The DM1’s output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz, and hum.
Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum.
IN THE BOX
sE Logo Sticker
User manual with warranty card
Frequency Range: 10 Hz – 120,000 Hz (-0.3 dB)
Gain: 28 dB (load 1kOhms)
Max output level (0.5% THD): 8.3 dBV (2.6 V)
Output noise level: 9 μV (JIS-A)
Powering: 48 Volts according toIEC 61938
Electrical impedance: 135 Ohms
Recommended load impedance: >1k Ohms
Current consumption: 3.0 mA
Connectivity: 3-pin male/female XLR connector
Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.)
Weight: 80 g (2.82 oz.)
There are no reviews yet.